1,3,5-Tri-2-propenyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione/TAIC CAS 1025-15-6

[Typical Properties]

Clear liquid or crystal.Soluble in water. 

[Specification]

[Usage]

1. Various thermoplastic plastics (polyethylene, polyvinyl chloride, chlorinated polyethylene,...) EVA、 Crosslinking modifier for polystyrene, etc. The general addition amount for thermal crosslinking is 1-3%, and the addition of diisopropylbenzene peroxide (DCP) is 0.2-1%; The dosage of irradiation crosslinking is 0.5-2%, and DCP can no longer be added. Crosslinking can significantly improve the heat resistance, flame retardancy, solvent resistance, mechanical strength, and electrical properties of the product. It significantly improves product quality and has no odor compared to using peroxide system crosslinking alone. Typical use for polyethylene, polyethylene/chlorinated polyethylene, polyethylene/EVA, cross-linked cables, and polyethylene high and low foam products.

2. Ethylene propylene rubber, various fluororubbers CPE and other special rubber vulcanizing agents (commonly used in combination with DCP, with a general dosage of 0.5-4%) can significantly shorten vulcanization time, improve strength, wear resistance, solution resistance, and corrosion resistance.

3. The crosslinking agent for acrylic acid and styrene type ion exchange resins has lower dosage and higher quality than the crosslinking agent for divinylbenzene. It can prepare ion exchange resins with excellent properties such as pollution resistance, high strength, large pore size, heat resistance, acid and alkali resistance, and oxidation resistance. This is a newly developed and promising new ion exchange resin both domestically and internationally.

4. Modified agents such as polyacrylates and polyalkyl acrylates can significantly improve heat resistance, optical properties, and processing performance. Typically used for heat resistance modification of ordinary organic glass.

five

Epoxy resin The modifier of DAP (diallyl phthalate) resin can improve heat resistance, adhesion, mechanical strength, and dimensional stability, and is typically used for the modification of epoxy sealing materials and encapsulation materials.

6. Crosslinking agents and modifiers for unsaturated polyester and thermoplastic polyester can significantly improve heat resistance, chemical corrosion resistance, dimensional stability, weather resistance, and mechanical properties. Typically used to improve the heat resistance of hot pressed unsaturated polyester fiberglass products, modified products can be used at temperatures above 180 ℃.

7. The homopolymer of TAIC itself, triallyl isocyanate, is a transparent, hard, heat-resistant, and electrically insulating resin that can also be used for bonding glass and ceramics. Typical for manufacturing multi-layer safety glass.

8. The internal plasticizer of polystyrene, as well as the copolymerization modification of styrene and TAIC, can produce transparent and shatter resistant products.

9. Protective agents for metal heat resistance, radiation resistance, and weather resistance, TAIC prepolymers are baked onto metal surfaces, and their baked coatings have excellent heat resistance, radiation resistance, weather resistance, and electrical insulation properties. Typical insulation materials used in the manufacturing of microelectronic products, such as printed circuit boards.

10. Intermediates such as UV curable coatings, photoresists, flame retardants, and flame retardant crosslinking agents. Typical for synthesizing efficient flame retardant TBC and flame retardant crosslinking agent DABC.

[Storage]

Keep tightly closed.Store in dry and ventilated place.Keep away from fire,heat sources and oxidants.